Industrial heaters is a need to be fixed to the wall or roof of electric heating products suitable for use in places such as factories, garages, shops, drying room. 
 Work through the fan forced air circulation, air heating and temperature balance, and places suitable for intermittent heating. 
 With a switch on the device, but if the modified high-temperature, directly on the device operation is not convenient, selectable when ordering wire models of switches are mounted on the wall. 
 Places need fresh air ventilation, equipment and duct even executive then adjust the fresh air by the wind. Fixed at the top of the wall or boron, fierce saving floor space, hanging in the roof installation. 

 The warm air blower is a joint made by the fan, motor and heat sink combination unit. Apply to the air to allow the recycling of all types of workshop, when the air free of dust, flammable gas, can be used as the circulating air heating. 

 Fan heater air heater and fan, air heater heat, and then send fan, the indoor air temperature to adjust. The air heater of spiral finned tubes. Such as steam-type heaters heat pipe with aluminum equipment around the wall thickness Φ21.5 seamless boiler tube, fin spacing is 2.5mm, the exhaust pipe and the heat medium circulation pipe is integrally welded structure, heaters The working pressure below 0.8MPa.